74HC365D
Buffers & Line Drivers 74HC365D/SOT109/SO16
Description
The 74HC365; 74HCT365 is a hex buffer/line driver with 3-state outputs controlled by the output
enable inputs (OEn). A HIGH on OEn causes the outputs to assume a high impedance OFF-state.
Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to
voltages in excess of VCC.
Features and benefits
• Wide supply voltage range from 2.0 V to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Complies with JEDEC standards:
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• Non-inverting outputs
• Input levels:
• For 74HC365: CMOS level
• For 74HCT365: TTL level
• ESD protection:
• • HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• Multiple package options
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Technical Data
| Manufacturer | Nexperia |
| Product Category | Buffers & Line Drivers |
| Number of Input Lines | 6 Input |
| Number of Output Lines | 6 Output |
| Polarity | Non-Inverting |
| High Level Output Current | - 7.8 mA |
| Low Level Output Current | 7.8 mA |
| Quiescent Current | 8 uA |
| Supply Voltage - Max | 6 V |
| Supply Voltage - Min | 2 V |
| Operating Supply Current | 160 uA |
| Minimum Operating Temperature | - 40 C |
| Maximum Operating Temperature | + 125 C |
| Mounting Style | SMD/SMT |
| Package / Case | SOIC-16 |
| Brand | Nexperia |
| Function | Buffer/Line Driver |
| Height | 1.45 mm (Max) |
| Input Signal Type | Single-Ended |
| Length | 10 mm (Max) |
| Logic Family | HC |
| Number of Channels | 6 |
| Operating Supply Voltage | 5 V |
| Output Type | 3-State |
| Product Type | Buffers & Line Drivers |
| Propagation Delay Time | 95 ns at 2 V, 19 ns at 4.5 V, 16 ns at 6 V |
| Subcategory | Logic ICs |
| Supply Current - Max | 8 uA |
| Technology | CMOS |
| Width | 4 mm (Max) |
